The professional audio amplifiers in the axxent TS series are optimised for use in fixed installations. The 2-channel model AX2120TS MKII complements this series with an output power of 120 W/channel and 240 W mono bridged per pair. The switching power supply saves weight and increases efficiency and power balance.
Each of the 2 channels offers an independent clip limiter with separate indicators on the front panel. The excellent audio quality across the entire power range is supported in the inputs by special balanced ICs with high common mode rejection.
In addition to the constant voltage outputs with 70 and 100 V taps, low-impedance outputs are also available.
The galvanic isolation provided by high-quality audio output transformers enables earth fault monitoring and serves to protect the 100 V lines against accidental contact.
The nominal output power is 120 W at 100 V and 8 ohms. These flexible output configurations make the AX2120TS MKII 2-channel amplifier the ideal choice for use in fixed installations. The two amplifier channels can be operated individually or in bridge mode (1×234 ohms at 16 ohms) to combine power. The only adjustment elements on the front panel are the individual level controls. To protect against unintentional or unauthorised adjustment, the control knobs can be removed and replaced with the blanking plugs supplied.
The plug connections - Inputs: analogue balanced XLR. All outputs low impedance/70 V/100 V have 5-pin Phoenix screw terminal connectors. Mains voltage input via IEC connector. The robust housing is made of reinforced, powder-coated sheet steel. CE certification for use throughout Europe.
Features
- Output power: 2 x 120 Wrms with all constant voltage output configurations (70/100 V) and with low impedance outputs (8 Ohm). In bridge mode 1x234 Wrms at 16 Ohm.
- Analogue, balanced XLR inputs outputs.
- Euroblock output connector for all outputs.
- High-quality audio output transformers for galvanic isolation enable earth fault monitoring and provide contact protection for 100 V lines.
- Two-speed fan with automatic control.
- Removable rotary knobs and dummy plugs and on/off switches on the rear to prevent unauthorised changes to the settings.
- IEC mains connection socket on the rear of the device facilitates cabling in the rack.
- Dimensions: 484 x 88 x 330 mm (WxHxD)
- Net weight: 9.6 kg without enclosed mains cable
- Scope of delivery: amplifier, mains cable, dummy plug
- European quality product
