 |
 |
| deutsch | english |
Intelligent Audio Solutions for Professionals
Intercom Systems
LP100 Call Signal Light
With 30 volt bulbs and matt dome. 3 pin XLR in- and out connectors for standard microphone cables, looping in to the intercom line. Stable surface placement with rubber feet.
Size of the base 12,2 x 9 x 5,4 cm (l x w x h).
Dome height 4 cm.
Net weight 446 g.
All axxent signal lights have in common:
• Compatible to axxent partyline intercom systems, however, they also work flawlessly with most of the other commonly available partyline systems.
• They use a voltage of approx. 30 volt DC, derived from the XLR connectors. Voltage may drop to 24 volt DC without causing a problem.
Pin layout of the 3 pin XLR connectors:
Pin 2 = plus 15 V, Pin 1 = minus 15 V, pin 3 serves as loop through of the intercom signal.
With 30 volt bulbs and matt dome. 3 pin XLR in- and out connectors for standard microphone cables, looping in to the intercom line. Stable surface placement with rubber feet.
Size of the base 12,2 x 9 x 5,4 cm (l x w x h).
Dome height 4 cm.
Net weight 446 g.
All axxent signal lights have in common:
• Compatible to axxent partyline intercom systems, however, they also work flawlessly with most of the other commonly available partyline systems.
• They use a voltage of approx. 30 volt DC, derived from the XLR connectors. Voltage may drop to 24 volt DC without causing a problem.
Pin layout of the 3 pin XLR connectors:
Pin 2 = plus 15 V, Pin 1 = minus 15 V, pin 3 serves as loop through of the intercom signal.